A day-by-day account of the activities of the Rossnaree Archaeological Project 2010-11

Day 6 – Moving up a gear.

Magnetic gradiometry, Area 1.

We all arrived down to the site hut revitalised, reinvigorated and ready for the new week. We were close to being completely free of the monotony of mattocking, shoveling and sieving through ploughsoil, although the finds we are coming across are nice. In Area 1 at the start of the day there were still 10 square metres to be dug away and throughout the day the team there got through seven and two half squares. Tomorrow, there are only two half-squares and one full one to go. Once they are gone, we will be nearly ready to begin to search for the features identified in the geophysical surveys carried out by Kevin before the dig started up. In the plot the cutting itself is made up of columns G, H and I and extends from row 1 to row 10. This takes in two very distinct features: one, a possible ditch running from north to south (from previous geophysical surveys this seems to be the innermost enclosure defining the knoll of high ground) and the second, at a higher level and cutting the other feature curving in from the middle of the right side to the bottom of the panel (this seems to be a separate oval enclosure superimposed on the other ditch. See the original plot HERE). This cutting will investigate the exact relationship between these two separate features and hopefully will yield material for dating.

Lisa, Mags and Sarah.
Sophie on the sieve.
Darren gets to trowel.
Magnetic gradiometry, Area 2.

.

.

.

.

.

.

.

.

In Area 2, they started the day with just two metre squares to go and these were quickly removed and sieved. Once this was completed, we took another series of soil samples for lab magnetic susceptibility measurements using the same grid as before. Thus we will be able to compare values taken from the field surface to those at the base of ploughsoil. Once this was done the cutting was ready to be troweled back. There was still a layer of ploughsoil over the cutting – we deliberately didn’t remove everything when we were mattocking off the ploughsoil partly to protect the site from being open too long and from the impact of people crossing over and back as they work. Trowelling, with the help of some light mattocking where necessary, is the next step taken to remove any remaining layer of disturbed ploughsoil and begin to identify the features underneath. We are lucky in that we have a very detailed set of geophysical plots to guide us as to what to expect. However, the picture here is less clear with a series of features that are unfortunately less identifiable than those in Area 1. The excavation here is to explore the nature of these possible features – our hunch is that they may be houses because of their location within the innermost enclosure on the highest point in the site – but we will be scratching our heads if we don’t end up finding the features indicated on the geophysical plots. The cutting itself measures 5m x 4m and is located between squares Q10-13 and U10-13 although this will probably be extended southwards at a later stage.

Eimear searches for the feature in square U13.
All hard at work in Area 2.
Advertisements

Comments are closed.